BOLL
BOLL High Build Primer Filler - Spray
Quick-drying acrylic primer spray. The product offers excellent filling and anti-corrosive properties, making it ideal for surface preparation in painting and varnishing projects. It is specifically designed for leveling putty and old coatings.
Available options
3 variantsBuy by the carton (trade)
12 units / carton£86.29 inc. VAT (£71.91 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Drying time
- 90 min
- Application temp.
- 15°C to 25°C
- Packaging
- spray
Safety & documentation
Hazards
Flammable
Harmful or irritant
Serious health hazardThis sheet covers the option selected above. Always verify product specifications and safety information before use.
More about this product
Quick-drying acrylic primer filler spray.
The product offers excellent filling and anti-corrosive properties, making it ideal for surface preparation in painting and varnishing projects.
It is specifically designed for leveling putty and old coatings, providing superb adhesion to a wide range of surfaces.
Easy to sand, it can be coated with most available paints and varnishes.
Surface Preparation
Metal : Sand the surface, blow off sanding dust and degrease using BOLL Silicon Remover, then apply another coat.
Non-ferrous metals (zinc, aluminium, copper, etc.) : Prime and sand the surface. Blow off sanding dust and degrease using BOLL Silicon Remover, then apply another coat.
Old paint coatings : Sand with P220–P320 abrasive paper. Blow off sanding dust and degrease using BOLL Silicon Remover, then apply another coat.
Epoxy primer : Can be used to isolate materials. After sanding, blow off sanding dust and degrease using BOLL Silicon Remover, then apply another coat.
Two-component acrylic primer : Apply a guide coat or control powder. After sanding, blow off sanding dust and degrease using BOLL Silicon Remover, then apply another coat.
Polyester putty : Sand the surface, blow off sanding dust and degrease using BOLL Silicon Remover, then apply another coat.
Application
1. Thoroughly clean and sand the surface using P240–P360 abrasive paper.
2. Thoroughly clean and degrease the surface using BOLL Silicon Remover.
3. Mix the product thoroughly.
4. Apply 2–3 layers from a distance of 15–20 cm.
5. Allow 5–10 minutes between individual layers.
6. After approximately 1.5 hours, the surface can be coated with varnish.
7. After use, turn the container upside down and spray until the valve is empty.
Physical Properties
- Physical state: Aerosol
- Application temperature: +15°C to +25°C
