BOLL
BOLL Panel Wipe (Silicone Remover & Degreaser)
Perfect for removing all greasy stains, tar, asphalt, underbody preservatives, dirt and dissolving artificial resins. Prevents craters, eyes or larger inclusions in the applied coating.
Available options
2 variantsBuy by the carton (trade)
12 units / carton£75.49 inc. VAT (£62.91 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Packaging
- can
Safety & documentation
Hazards
Danger
Flammable
Harmful or irritant
Serious health hazard
Hazardous to the environmentThis sheet covers the option selected above. Always verify product specifications and safety information before use.
More about this product
A silicone remover and panel wipe for removing grease, tar, asphalt, underbody protection residues and dirt.
Also dissolves synthetic resins.
Helps prevent craters, fisheyes and contamination defects in subsequent paint coatings.
COLOUR
- Colourless
SUITABLE SURFACES
- Steel
- Aluminium
- Galvanised steel
- Stainless steel
- Existing paint coatings
- Acrylic primers
- Polyester fillers
- Plastics
APPLICATION
1. Apply to the oily or contaminated surface using a BOLL Sprayer for Silicone Remover.
2. Wipe in one direction using a disposable paper towel or a clean cloth.
3. Repeat the cleaning process at least twice, using a clean cloth each time.
4. Allow any remaining product to evaporate completely after degreasing.
PHYSICAL PROPERTIES
Density at 20°C: 0.710-0.750 g/cm³
Volatility index (ether = 1): 6
Solubility in water: Insoluble
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
