BOLL
BOLL Cavity Wax
Extremely effective wax-based agent for corrosion protection of closed car body sections (e.g. bonnet, sills or doors). Forms a tight and flexible coating to protect against water, salt and rust. Available in two colours: white and amber.
Available options
2 variantsBuy by the carton (trade)
12 units / carton£86.29 inc. VAT (£71.91 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Application temp.
- 15°C to 25°C
- Packaging
- can
Safety & documentation
Hazards
Flammable
Harmful or irritant
Serious health hazard
Hazardous to the environmentThis sheet covers the option selected above. Always verify product specifications and safety information before use.
More about this product
Extremely effective wax-based agent for corrosion protection of closed car body sections (e.g. bonnet, sills or doors).
Forms a tight and flexible coating to protect against water, salt and rust.
Available in two colours: white and amber.
The amber agent has a lower viscosity, making it more penetrating - it reaches the depths of the profiles more easily.
White agent (with higher viscosity): is better suited, for example, to protect the inner surfaces of door sheets or bonnets, as it leaves a thicker layer after application that does not run off.
Many professionals use both agents - one after the other (amber and then white).
Important Information
Inject the cavity wax into existing holes in the vehicle body using a spray gun equipped with a suitable adapter.
If necessary, drill holes with a diameter of 6 mm.
Application
1. Mix the product thoroughly.
2. Inject using a spray gun equipped with a suitable adapter.
- Air pressure: 4–6 bar
3. Apply a coating thickness of 0.2–0.4 mm.
4. Allow approximately 4 hours for drying.
Physical Properties
- Density at 20°C: 0.813–0.834 g/cm³
- Application temperature: +15°C to +25°C
Cleaning
Clean the spray gun using white spirit.
