Skip to main content
1 / 2

ITALKO

ITALKO Cavity Wax - Spray

Wax-based cavity protection spray for vehicle box sections, sills and door interiors. Penetrates seams and gaps, leaving a flexible protective film against moisture, road salt and corrosion. Available in Amber and Clear, 500ml.

Available options

2 variants
Selected: 500ml · Transparent · SprayIn stock
£6.79inc. VAT · £5.66 ex. VAT
1

Buy by the carton (trade)

12 units / carton

£73.33 inc. VAT (£61.11 ex. VAT) per carton of 12 · 10% trade discount.

Technical specifications

Packaging
spray

Safety & documentation

Hazards

Danger

FlammableHarmful or irritantSerious health hazard

Always verify product specifications and safety information before use.

More about this product

ITALKO Cavity Wax Spray protects enclosed vehicle body sections against corrosion.

Its penetrating formula reaches seams, narrow gaps and difficult-to-access areas. After drying, it leaves a flexible, water-repellent wax film that protects against moisture and road salt.

Supplied in a 500ml aerosol can with an application hose for reaching inside cavities.

KEY FEATURES

  • Wax-based protection – forms a flexible anti-corrosion film.
  • Penetrating formula – reaches narrow seams and gaps.
  • Water-repellent coating – helps protect against moisture.
  • Road-salt resistance – suitable for vehicle cavity protection.
  • Application hose included – provides access to enclosed sections.
  • Two colour options – available in Amber and Clear.

SUITABLE FOR

  • Sills and box sections
  • Door interiors
  • Internal side-panel cavities
  • Bonnet and boot-lid cavities
  • Pillars and crossmembers
  • Concealed bodywork seams

APPLICATION

  1. Shake the can thoroughly for approximately 3 minutes.
  2. Insert the supplied hose through an existing cavity access hole.
  3. Apply evenly to the internal surfaces, following the instructions on the can.
  4. Aim for the manufacturer’s recommended coating thickness of 0.2–0.4mm.
  5. Allow approximately 4–5 hours to dry at 20°C.
  6. After use, invert the can and spray briefly to clear the valve.

IMPORTANT INFORMATION

  • Intended for concealed vehicle cavities and internal body sections.
  • Protect surrounding surfaces from overspray.
  • Keep vehicle drainage openings clear.
  • Drying time varies with temperature, ventilation and coating thickness.
  • Follow the product label and Safety Data Sheet before use.
  • Use suitable personal protective equipment and adequate ventilation.

TECHNICAL SPECIFICATION

Brand: ITALKO
Product type: Cavity wax
Base: Wax
Application: Aerosol with cavity hose
Protective film: Flexible wax coating
Recommended coating thickness: 0.2–0.4mm
Approximate drying time: 4–5 hours at 20°C
Capacity: 500ml
Packaging: Aerosol can

AVAILABLE VARIANTS

500ml · Amber · Aerosol

500ml · Clear · Aerosol

PACKAGE CONTENTS

  • 1 × ITALKO Cavity Wax Spray 500ml in the selected colour
  • Application hose

Often used with

Similar products from other brands