ITALKO Cavity Wax

ITALKO Cavity Wax is a wax-based anti-corrosion treatment designed to protect enclosed and difficult-to-reach vehicle body sections.

Its excellent penetrating properties allow the product to reach narrow gaps, small cracks and concealed areas.

After application, it forms a flexible, water-repellent protective film that helps prevent corrosion caused by moisture and road salt.

The product adheres effectively to paint coatings, metal primers, bare metal and PVC.

It can be applied using a brush or suitable spraying equipment.

KEY FEATURES

• Wax-based formulation – creates a durable protective film.
• Excellent penetrating properties – reaches narrow gaps and difficult-to-access areas.
• Corrosion protection – helps protect treated surfaces against rust.
• Water-repellent coating – limits the harmful effects of moisture.
• Road salt resistant – suitable for vehicle body and underbody sections.
• Permanently flexible – the coating remains flexible after drying.
• Good adhesion – suitable for paintwork, metal primers, bare metal and PVC.
• Low-mist application – supports cleaner and more controlled spraying.
• Non-sagging during drying – helps the coating remain in the applied area.
• Brush or spray application – allows the method to be selected for the repair.

SUITABLE FOR

• Door cavities and enclosed door sections
• Vehicle sills and chassis profiles
• Side panels and wheel arches
• Bonnet and boot-lid cavities
• Pillars and cross members
• Concealed bodywork sections
• Narrow gaps, joints and small cracks
• Automotive restoration and corrosion prevention

APPLICATION

Apply the product by brush or with suitable spraying equipment, directing it into the enclosed section or cavity requiring protection.

For effective protection, aim for a coating thickness of approximately 0.2–0.4 mm. Allow the coating to dry for approximately 4–5 hours at 20°C.

TECHNICAL SPECIFICATION

Product type: Wax-based cavity protection
Capacity: 1L
Application method: Brush or spray
Recommended coating thickness: 0.2–0.4 mm
Drying time: Approximately 4–5 hours at 20°C
Density at 20°C: 0.66 g/cm³