ITALKO Fast-Curing Windscreen Adhesive

ITALKO Fast-Curing Windscreen Adhesive is a professional one-component polyurethane adhesive designed for bonding and installing automotive glass.

The moisture-curing formula combines high mechanical strength with high viscosity and good stability, helping the adhesive retain its shape without running during application.

It is suitable for bonding windscreens as well as side and rear vehicle glass. The adhesive can be applied to glass and metal body panels and provides strong adhesion to both smooth and rough surfaces.

Once cured, it forms a waterproof, vapour-resistant bond with good resistance to UV radiation and adverse weather conditions.

KEY FEATURES

• Fast-curing polyurethane formula
• One-component and ready to apply
• High mechanical strength
• High-viscosity, non-sag consistency
• Suitable for front, side and rear vehicle glass
• Strong adhesion to glass and metal body panels
• Suitable for smooth and rough surfaces
• Resistant to UV radiation and weather conditions
• Waterproof and vapour resistant
• Suitable for cold application
• Helps prevent galvanic corrosion on aluminium vehicle components

SUITABLE FOR

• Windscreen installation
• Side-window installation
• Rear-window installation
• Automotive glass replacement
• Bonding glass to vehicle body panels
• Professional bodyshops and vehicle glass services

APPLICATION

1. Thoroughly clean the glass and the bonding area on the vehicle body.
2. Clean and correctly prime any paint damage exposed while removing the old glass.
3. Apply a compatible glass adhesive primer where required, following the primer manufacturer’s instructions.
4. Trim firmly bonded old adhesive to a thickness of approximately 1–2 mm. Remove any loose or poorly bonded material.
5. Open the cartridge and prepare the application nozzle.
6. Apply a continuous, even bead around the complete bonding area. Overlap the beginning and end of the bead to ensure a complete seal.
7. Position and install the glass before the adhesive begins to form a skin.
8. Maintain the required temperature and humidity during installation.
9. Do not move or drive the vehicle until the minimum safe drive-away time specified in the product’s technical documentation has elapsed.

IMPORTANT INFORMATION

The manufacturer describes this product as a 1-hour fast-curing adhesive. Safe drive-away time can depend on temperature, humidity, vehicle construction and the presence of airbags. Always follow the current technical documentation before returning the vehicle to service.

TECHNICAL SPECIFICATION

Product type: Automotive glass adhesive and sealant
Chemical base: Polyurethane
Components: One-component
Curing method: Atmospheric moisture
Colour: Black
Consistency: High viscosity, non-sag
Capacity: 310ml
Packaging: Cartridge
Service temperature: -40°C to +80°C
Manufacturer’s designation: 1-hour FAST

PACKAGE CONTENTS

• 1 × ITALKO Fast-Curing Windscreen Adhesive cartridge