BOLL
BOLL Windscreen Adhesive Sprint
One-component polyurethane adhesive sealant with wery fast curing through moisture in the air. It is used for installing windscreen and is suitable for vehicles equipped with airbag systems. After one hour from application the car is ready for use.
Available options
Buy by the carton (trade)
12 units / carton£86.29 inc. VAT (£71.91 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Drying time
- 1 h
- Application temp.
- 5°C to 35°C
- Packaging
- cartridge
Safety & documentation
Hazards
Danger
Serious health hazardAlways verify product specifications and safety information before use.
More about this product
BOLL Windscreen Adhesive Sprint is a one-component polyurethane windscreen adhesive that cures rapidly with moisture from the air to form a durable elastomeric bond.
It offers strong mechanical performance and resistance to water, weathering and acids.
The flexible cured bond accommodates the different thermal expansion of glass and metal, allowing the bonded surfaces to move independently during temperature changes.
Designed for bonding front and rear vehicle windscreens.
Suitable for vehicles fitted with airbags and compliant with the CRASH TEST FMVSS 212 standard after 3 hours at 23°C and 50% relative humidity.
COLOUR
- Black
METHOD OF USE
Apply BOLL Glass Primer to the glass and vehicle body bonding surfaces, then allow it to dry for at least 15 minutes.
Apply the adhesive manually or pneumatically using a BOLL caulking gun. Apply a continuous bead without gaps, then position and press the windscreen firmly onto the spacer blocks.
After 1 hour at 23°C and 50% relative humidity, the vehicle is suitable for use.
APPLICATION
1. Clean and degrease the edges of the glass using BOLL Silicone Remover.
2. Prime the glass and vehicle body bonding surfaces with BOLL Glass Primer.
3. Allow the primer to dry completely for approximately 15 minutes.
4. Apply the adhesive using a BOLL caulking gun.
5. Allow approximately 1 hour at 20°C before using the vehicle.
PHYSICAL PROPERTIES
Density at 20°C: 1.23 g/cm³
Shore A hardness (ISO 868, 3 sec): 60-65
Tensile strength at break (ISO 37): >700%
Breaking factor (ISO 37): >870 psi
Application temperature: +5°C to +35°C
Skin formation time: 25-40 minutes at 23°C and 50% relative humidity
Curing rate: >3.5 mm in 24 hours at 23°C and 50% relative humidity
Shear strength after 5 hours: >130 psi at 23°C and 50% relative humidity
Shear strength after 7 days: >500 psi at 23°C and 50% relative humidity (FMVSS 212)
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
