BOLL
BOLL Plastic Primer - Spray
BOLL Plastic Primer Spray is a fast-drying, flexible adhesion primer for plastic vehicle parts such as bumpers, spoilers and trims. Its colourless formula improves adhesion between plastic surfaces and subsequent paint coats.
Available options
Buy by the carton (trade)
12 units / carton£60.80 inc. VAT (£50.67 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Application temp.
- 15°C to 25°C
- Packaging
- spray
Safety & documentation
Hazards
Danger
Flammable
Harmful or irritant
Serious health hazard
Hazardous to the environmentAlways verify product specifications and safety information before use.
More about this product
BOLL Plastic Primer Spray is a fast-drying, one-component adhesion primer designed for plastic surfaces.
Its flexible formula improves adhesion between the plastic surface and subsequent paint coats. Suitable for preparing plastic vehicle parts such as bumpers, spoilers and trims before painting.
COLOUR
- Colourless
IMPORTANT
Do not use on heated plastic parts.
APPLICATION
1. Thoroughly clean and matt the surface.
2. Clean and degrease the surface using BOLL Silicone Remover.
3. Shake the container thoroughly for approximately 3 minutes.
4. Apply 2–3 coats from a distance of 15–20 cm.
5. Allow 5–10 minutes between coats.
6. After approximately 45 minutes, the surface can be painted.
7. After use, turn the container upside down and spray until the valve is empty.
PHYSICAL PROPERTIES
Physical state: Aerosol
Application temperature: +15°C to +25°C
CAPACITY
- 400 ml
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
