ITALKO White Dry Guide Coat with Applicator

ITALKO White Dry Guide Coat Powder is used during the sanding process to reveal scratches, low spots, raised areas and other imperfections that may be difficult to see on primers and undercoats.

The white powder provides clear contrast on darker surfaces and remains inside scratches and low areas during sanding, making defects immediately visible.

Its solvent-free dry formulation requires no masking or drying time. The surface can be sanded immediately after application using either wet or dry sanding methods.

The supplied applicator helps distribute the powder evenly across flat panels, edges and contoured surfaces.

KEY FEATURES

• Immediate defect detection – highlights scratches, low spots and surface irregularities.
• White guide coat – provides clear visibility on darker primers and undercoats.
• Solvent-free formulation – does not require drying before sanding.
• Suitable for wet and dry sanding – supports different surface-preparation methods.
• No masking required – allows fast preparation and inspection.
• Even surface coverage – the applicator distributes the powder across the prepared area.
• Contour control – helps check the shape and level of repaired panels.
• Reusable applicator included – ready for immediate workshop use.

SUITABLE FOR

• Dark-coloured primers and undercoats
• Automotive body fillers
• Checking repaired vehicle panels
• Detecting sanding scratches
• Identifying low and raised areas
• Controlling panel contours
• Wet sanding
• Dry sanding
• Professional bodyshops and paintshops
• Vehicle restoration and refinishing work

APPLICATION

1. Ensure that the primer, undercoat or filler is completely dry before application.
2. Apply a small quantity of guide coat powder to the prepared surface.
3. Use the supplied applicator to gently spread and rub the powder evenly across the entire area.
4. Ensure that the powder reaches scratches, pinholes and other surface imperfections.
5. Begin sanding using the selected wet or dry sanding method.
6. Continue sanding until the guide coat has been completely removed from the correctly levelled surface.
7. Powder remaining in scratches or low areas indicates that further sanding or corrective work is required.
8. Clean the surface thoroughly before applying subsequent refinishing materials.

IMPORTANT INFORMATION

• Apply only to dry and fully cured filler, primer or undercoat.
• Use a light, even layer; excessive powder is unnecessary.
• The guide coat identifies defects but does not fill or repair them.
• Avoid inhaling airborne dust and wear appropriate respiratory protection.
• Keep the container closed when not in use.
• Refer to the product packaging and safety information before use.

TECHNICAL SPECIFICATION

Brand: ITALKO
Product type: Dry guide coat powder
Colour: White
Powder weight: 100g
Application: Manual application with supplied applicator
Suitable sanding methods: Wet and dry
Solvent content: Solvent-free
Drying time: Not required

KIT CONTENTS

• 1 × ITALKO White Dry Guide Coat Powder, 100g
• 1 × Application pad