BOLL
BOLL Guide Coat - Spray
Fast-drying paint used as an auxiliary agent when sanding paint coatings. It highlights any irregularities after preliminary sanding of puttiess or primers.Have very short drying time, is easy to work with, and does not clog sandpaper during use.
Available options
Buy by the carton (trade)
12 units / carton£48.49 inc. VAT (£40.41 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Application temp.
- 15°C to 25°C
- Packaging
- spray
Safety & documentation
Hazards
Danger
Flammable
Harmful or irritantAlways verify product specifications and safety information before use.
More about this product
BOLL Guide Coat Spray (Control Lacquer) is a fast-drying sanding guide coat designed to reveal surface imperfections during paint preparation.
Applied before sanding, it highlights scratches, pinholes, low spots and uneven areas, making it easy to identify where further work is required.
The short drying time allows work to continue quickly, while the formulation helps prevent clogging of the abrasive paper during sanding.
Suitable for use on polyester filler and primer surfaces.
COLOUR
Matt black
APPLICATION
- Shake the container thoroughly for approximately 3 minutes.
- Apply a thin, even mist to the polyester filler or primer surface from a distance of 15–20 cm.
- After use, turn the container upside down and spray briefly until the valve is clear.
PHYSICAL PROPERTIES
Physical state: Aerosol
Organic solvent content: 89.9%
Solid content: 25%
Application temperature: +15°C to +25°C
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
