BOLL
BOLL Rust Converter - Spray
Based on high-quality epoxy resins. Gives excellent priming and anti-corrosive properties. Is as both primer and base for subsequent layers, include various types of paints, varnishes, and polyester putties. Can be applied directly on rust.
Available options
Buy by the carton (trade)
12 units / carton£89.10 inc. VAT (£74.25 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Application temp.
- 15°C to 25°C
- Packaging
- spray
Safety & documentation
Hazards
Flammable
Harmful or irritant
Serious health hazardAlways verify product specifications and safety information before use.
More about this product
It is a product based on high-quality epoxy resins. Unique formulation, it has excellent priming and anti-corrosive properties. At the same time, it acts as a primer and also as a primer for subsequent layers, which can be various types of paints, varnishes and polyester putties. It has a wide variety of applications and can be applied directly to rust. It actively acts on rust with the formation of blocking organic iron compounds and a protective epoxy coating against corrosion.
Method of Use
Remove loose rust fragments, then thoroughly clean, degrease and dry the surface to be coated.
The product can be painted over with most paints and topcoats after approximately 6 hours at 20°C.
A compatibility test is recommended before applying the selected paint or topcoat.
Application
1. Thoroughly clean and matt the surface.
2. Thoroughly clean and de-grease the surface using BOLL Silicone Remover.
3. Mix the product thoroughly.
4. Apply 2–3 layers from a distance of 15–20 cm.
5. The product can be painted over with most paints and varnishes after approximately 6 hours at 20°C.
6. After use, turn the aerosol upside down and spray until the valve is empty.
Physical Properties
- Physical state: Aerosol
- Application temperature: +15°C to +25°C
