BOLL Masking Tape 60°C

BOLL Masking Tape 60°C is a heat-resistant crepe paper tape designed for automotive refinishing and industrial painting work.

The natural rubber adhesive provides reliable adhesion to a variety of properly prepared surfaces.

The tape helps create clean masked edges and can be removed without leaving adhesive marks after the drying process.

Suitable for painting and drying processes at temperatures up to 60°C.

COLOUR

• White

APPLICATION

1. Ensure that the surface is clean, dry, dust-free and thoroughly degreased.

2. Apply the tape evenly to the required masking line.

3. Press the tape firmly along its entire length, paying particular attention to edges and curves.

4. Complete the painting and drying process without exceeding the permitted temperature.

5. Remove the tape carefully after use.

PHYSICAL PROPERTIES

Backing material: Saturated crepe paper

Adhesive: Natural rubber

Total thickness: 130 µm

Adhesion to steel: 6.0 N/25 mm

Tensile strength: 85 N/25 mm

Elongation: 7%

Rolling ball tack: 2 cm

Application temperature: +15°C to +35°C

Maximum process temperature: 60°C

AVAILABLE SIZES

• 19 mm × 50 m
• 25 mm × 50 m
• 30 mm × 50 m
• 38 mm × 50 m
• 50 mm × 50 m

STORAGE

Protect the tape from excessively low and high temperatures.

Avoid direct exposure to sunlight and store in a dry place.