BOLL
BOLL 2-in-1 Lift Tape (Trim Masking)
BOLL 2-in-1 Deflecting Tape for lifting and masking rubber seals around windscreens and fixed windows. Two plastic strip allow the tape to be inserted beneath different seals, between the seal and bodywork for a clean paint edge.
Available options
Buy by the carton (trade)
10 units / carton£103.41 inc. VAT (£86.18 ex. VAT) per carton of 10 · 10% trade discount.
Safety & documentation
Always verify product specifications and safety information before use.
More about this product
BOLL 2-in-1 Lift Tape (Trim Masking), also referred to as Deflecting Tape, is designed for masking rubber seals around vehicle windscreens and fixed windows during painting.
The integrated plastic strip slides beneath the seal and lifts its edge away from the bodywork. This provides access to the area between the seal and vehicle body, helping to achieve a clean paint edge without removing the glass or seal.
Two plastic strip widths, 9 mm and 11 mm, allow the tape to be adapted to different seals.
COLOUR
- Yellow
METHOD OF USE
Ensure that the application surface is dry, clean, free from dust and thoroughly degreased.
Tear off the required section along the perforation.
Insert the plastic strip into the gap between the rubber seal and the window recess.
Gently pull the tape to lift and hold the edge of the seal away from the bodywork.
Mask the remaining surrounding area with masking paper or film.
PHYSICAL PROPERTIES
Backing: Stabilised crepe paper
Adhesive: Cross-linked modified rubber
Total tape width: 50 mm
Plastic strip widths: 9 mm and 11 mm
Thickness: 0.30 mm
Peel adhesion: 10 N/25 mm
Heat resistance: Up to +150°C for 1 hour
Waterborne coating resistance: Resistant
Weather resistance: Limited
Core diameter: 76 mm
AVAILABLE SIZE
- 50 mm × 10 m
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
