BOLL
BOLL Glass Fibre Mat
The mat, used together with BOLL polyester resin, for filling significant material gaps in vehicle bodies, boats, trailers, and similar structures, and for reinforcing, stiffening repaired components. In weights: 150, 300, 450 g/m². Size: 0.5 m².
Available options
3 variantsBuy by the carton (trade)
20 units / carton£43.02 inc. VAT (£35.85 ex. VAT) per carton of 20 · 10% trade discount.
Technical specifications
- Packaging
- loose
More about this product
Glass fibre mat for use with BOLL Polyester Resin to repair larger holes and missing sections in vehicle bodies, boats and trailers.
Forms a reinforced laminate that strengthens and stiffens repaired components.
AVAILABLE OPTIONS
- 150 g/m²: 0.5 m² per pack
- 300 g/m²: 0.5 m² per pack
- 450 g/m²: 0.5 m² per pack
APPLICATION
1. Clean, sand and degrease the repair area according to the resin’s surface preparation instructions.
2. Cut the mat so that it extends approximately 2 cm beyond the edges of the damaged area.
3. Mix BOLL Polyester Resin with its hardener according to the resin’s instructions.
4. Brush the mixed resin onto the prepared surface. Position the mat and press it down.
5. Thoroughly saturate the mat with resin. Apply additional layers as required, repeating the application and saturation steps.
6. Allow the resin to cure according to its instructions before sanding or levelling the repair with polyester filler.
