BOLL Clearcoat Lacquer MS 2:1 , 1 L

PROPERTIES

An MS (Medium Solid) clear coat offering excellent flow and a high-gloss finish.

Its advanced resins provide resistance to scratches, UV radiation and weather conditions.

No thinner is required.

Supplied as Clear Lacquer only (hardener not included).

COLOUR

• Colourless

SUITABLE SURFACES

Can be applied over most commercially available solventborne and waterborne basecoats.

APPLICATION

1. Mix the clear coat with STANDARD or FAST hardener in a ratio of 2:1 by volume:

• Clear coat: 2 parts
• Hardener: 1 part

Alternatively, mix by weight:

With STANDARD hardener:

• Clear coat: 100 g
• STANDARD hardener: 52 g

With FAST hardener:

• Clear coat: 100 g
• FAST hardener: 48.5 g

2. No thinner is required.

3. Recommended flow time using a DIN 4 cup at 20°C: 15-17 seconds.

4. Pot life of the prepared mixture at 20°C:

• STANDARD hardener: 4 hours
• FAST hardener: 3.5 hours

5. Spray-gun settings:

• Nozzle: 1.2-1.3 mm
• Pressure: 1.6-2.2 bar

6. Apply 2 coats.

7. Allow 5-10 minutes between coats.

8. Drying and curing times at 20°C:

With STANDARD hardener:

• Dust-free: 30 minutes
• Handling hardness: 12 hours
• Full hardness: 36 hours

With FAST hardener:

• Dust-free: 20 minutes
• Handling hardness: 9 hours
• Full hardness: 28 hours

9. Drying and curing times at 60°C:

With STANDARD hardener:

• Dust-free: 5 minutes
• Handling hardness: 30 minutes at 60°C, followed by 2 hours at 20°C
• Full hardness: 30 minutes at 60°C, followed by 24 hours at 20°C

With FAST hardener:

• Dust-free: 5 minutes
• Handling hardness: 20 minutes at 60°C, followed by 2 hours at 20°C
• Full hardness: 20 minutes at 60°C, followed by 24 hours at 20°C

10. When using short-wave infrared drying:

• Maximum temperature: 90°C
• Drying time: 8-12 minutes

PHYSICAL PROPERTIES

Application temperature: +15°C to +25°C

STORAGE

Protect the product from excessively low and high temperatures.

Avoid direct exposure to sunlight and store in a dry place.