BOLL Anti-Hologram Polishing Compound

BOLL Anti-Hologram Polishing Compound is a mildly abrasive finishing compound developed for demanding professional polishing work.

It effectively removes holograms and fine micro-scratches created during previous polishing stages, leaving a smooth surface with a high-gloss, mirror-like finish.

The product complements BOLL B1000 Polishing Compound and provides the best results when used after the B1000 cutting stage with a suitable polishing pad.

Suitable for machine or manual application.

Cutting power: 4/10
Gloss level: 10/10
Contains silicone: No

COLOUR

• White

APPLICATION

1. Mix the product thoroughly before use.

2. Apply a small amount of polish to a suitable polishing pad.

3. Spread the polish over a small section of the panel before beginning machine polishing.

4. Start polishing at the lowest machine speed.

5. Gradually increase the speed without exceeding 2,000 rpm.

6. Continue polishing until holograms and fine micro-scratches have been removed.

7. Wipe away any remaining product with a clean microfibre cloth.

The product can also be applied manually.

Do not use on hot panels or heated surfaces.

PHYSICAL PROPERTIES

Density at 20°C: 1.01 g/cm³
Application temperature: +15°C to +25°C
Maximum machine speed: 2,000 rpm

AVAILABLE SIZES

• 250 ml
• 500 ml

STORAGE

Protect the product from excessively low and high temperatures.

Avoid direct exposure to sunlight and store in a dry place.