ITALKO Metal Cutting Discs 125 × 1.0 × 22.2mm - 10 Pack

ITALKO Metal Cutting Discs are thin, flat abrasive discs designed for fast and precise cutting of suitable metal components using a compatible 125mm angle grinder.

The 1.0mm thickness produces a narrow cut while helping to reduce cutting resistance and unnecessary material loss.

Each disc has a 125mm outside diameter and a 22.2mm mounting bore. The discs are rated for a maximum operating speed of 12,000rpm and a maximum peripheral speed of 80m/s.

Supplied as a practical pack of 10 for regular workshop, fabrication, automotive and maintenance work.

KEY FEATURES

• Pack of 10 discs – suitable for regular professional and workshop use.
• 125mm diameter – designed for compatible 125mm angle grinders.
• 1.0mm thickness – supports fast, narrow and controlled cuts.
• 22.2mm bore – fits compatible angle-grinder spindles and flanges.
• Flat cutting-disc design – intended specifically for cutting operations.
• Maximum speed of 12,000rpm – clearly marked on the disc.
• Maximum peripheral speed of 80m/s – must not be exceeded.
• EN 12413 marking – manufactured to the stated safety standard for bonded abrasive products.
• Professional and DIY use – suitable for workshops, garages, fabrication and maintenance.

SUITABLE FOR

• Cutting suitable steel components
• Metal sheet
• Metal profiles and sections
• Pipes and tubes
• Metal bars and fasteners
• Automotive body and repair work
• Fabrication and engineering workshops
• General garage and maintenance work
• Suitable non-ferrous metals where permitted for the application

APPLICATION

1. Confirm that the angle grinder is compatible with a 125 × 1.0 × 22.2mm cutting disc.
2. Disconnect the tool from its power supply before installing or replacing the disc.
3. Inspect the disc carefully and do not use it if cracked, chipped, wet or otherwise damaged.
4. Fit the disc using the correct flanges and the tool manufacturer’s instructions.
5. Ensure that the grinder guard is correctly installed and positioned.
6. Allow the grinder to reach full operating speed before beginning the cut.
7. Guide the disc through the material using steady, controlled pressure.
8. Keep the disc straight within the cut and avoid twisting or applying sideways pressure.
9. Allow the disc and workpiece to cool before handling.

IMPORTANT INFORMATION

• Designed for cutting only; do not use for grinding or side loading.
• Never exceed the maximum speed of 12,000rpm or 80m/s.
• Always use a correctly fitted grinder guard.
• Wear suitable eye and face protection, hearing protection, gloves and respiratory protection where required.
• Secure the workpiece before cutting.
• Direct sparks away from people, vehicles, glass, painted surfaces and combustible materials.
• Do not use a damaged, dropped, contaminated or incorrectly stored disc.
• Confirm suitability for the specific metal before use.
• Follow the angle-grinder manufacturer’s instructions and applicable workplace safety procedures.
• Check all markings and any expiry information on the disc before use.

TECHNICAL SPECIFICATION

Brand: ITALKO
Product type: Flat abrasive metal cutting disc
Outside diameter: 125mm
Disc thickness: 1.0mm
Bore diameter: 22.2mm
Maximum rotational speed: 12,000rpm
Maximum peripheral speed: 80m/s
Application: Cutting suitable metals
Disc shape: Flat
Safety standard marked on disc: EN 12413
Pack quantity: 10 discs

PACKAGE CONTENTS

• 10 × ITALKO Metal Cutting Discs, 125 × 1.0 × 22.2mm

Angle grinder and personal protective equipment are not included.