BOLL
BOLL Silicone - Spray
For lubricating door locks, rubber seals, chains, hinges, etc. It is excellent for protecting rubber parts from drying out, freezing, and sticking together. It makes these parts flexible. It is resistant to high and low temperatures as well as water.
Available options
2 variantsBuy by the carton (trade)
12 units / carton£59.29 inc. VAT (£49.41 ex. VAT) per carton of 12 · 10% trade discount.
Technical specifications
- Application temp.
- 10°C to 35°C
- Packaging
- spray
Safety & documentation
Hazards
Danger
Flammable
Harmful or irritant
Hazardous to the environmentThis sheet covers the option selected above. Always verify product specifications and safety information before use.
More about this product
A silicone spray for lubricating door locks, rubber seals, chains, hinges and similar components.
It protects rubber parts from drying out, freezing and sticking together, helping to keep them flexible.
Resistant to water and high and low temperatures.
COLOUR
- Colourless
Sizes Available
200ml Spray
400ml Spray
APPLICATION
1. Thoroughly clean and degrease the surface with BOLL Silicone Remover.
2. Shake the container thoroughly for approximately 3 minutes.
3. Apply a thin layer of silicone. Use an extension tube to reach difficult areas.
4. In frosty weather, thoroughly spray the rubber seals around the doors, boot and bonnet before each car wash.
5. After use, turn the container upside down and spray until the valve is empty.
PHYSICAL PROPERTIES
Physical state: Aerosol
Application temperature: +10°C to +35°C
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
