BOLL
BOLL Rear View Mirror Adhesive
A very strong adhesive based on methacrylates, used for permanently mounting rearview mirrors on the windshield and for mounting car antennas, etc.
Available options
Technical specifications
- Drying time
- 24 h
- Application temp.
- 10°C to 25°C
- Packaging
- blister
Safety & documentation
Hazards
Danger
Flammable
CorrosiveAlways verify product specifications and safety information before use.
More about this product
BOLL Rear-View Mirror Adhesive is a high-strength methacrylate-based adhesive designed for permanently bonding rear-view mirror mounts to vehicle windscreens.
It is also suitable for attaching car aerials and similar components directly to glass.
COLOUR
- Amber
METHOD OF USE
Remove all remains of the old adhesive and mark the correct mounting position on the windscreen.
Thoroughly clean and degrease both the glass and the mirror mounting base.
Cut the supplied mesh to the shape of the mounting base.
APPLICATION
1. Apply the adhesive to the mirror mounting base after removing it from the mirror, where removable.
2. Spread a thin, even layer of adhesive over the entire contact area.
3. Place the prepared mesh onto the adhesive layer.
4. Immediately position the mounting base against the marked area of the windscreen.
5. Hold firmly for 1 minute.
6. Do not move the bonded component for at least 15 minutes.
7. Allow 24 hours for the adhesive to cure fully.
PHYSICAL PROPERTIES
Density at 20°C: 1.08 g/cm³
pH: 4-6
Application temperature: +10°C to +25°C
STORAGE
Protect the product from excessively low and high temperatures.
Avoid direct exposure to sunlight and store in a dry place.
