BOLL Clearcoat VHS 2:1 KIT (Clearcoat 1L + Hardener 0.5L)

A high-quality VHS (Very High Solid) clear coat offering excellent scratch resistance and a high-gloss finish.

Its high solids content ensures efficient coverage.

The product allows different surface textures to be achieved, helping to reproduce OEM factory finishes.

No thinner is required.

2:1 KIT Clearcoat 1L + Hardener 0.5L

COLOUR

• Colourless

SUITABLE SURFACES

Can be applied over most commercially available solventborne and waterborne basecoats.

APPLICATION

1. Mix the clear coat with STANDARD hardener in a ratio of 2:1 by volume:

• Clear coat: 2 parts
• STANDARD hardener: 1 part

Alternatively, mix by weight:

• Clear coat: 100 g
• STANDARD hardener: 52 g

2. No thinner is required.

3. Recommended flow time using a DIN 4 cup at 20°C: 18-22 seconds.

4. Pot life with STANDARD hardener: 1.5 hours at 20°C.

5. Spray-gun settings:

• Nozzle: 1.2-1.3 mm
• Pressure: 1.6-2.2 bar

6. Apply 2 coats.

7. Allow 5-10 minutes between coats.

8. Drying and curing times with STANDARD hardener:

At 20°C:

• Dust-free: 30 minutes
• Handling hardness: 12 hours
• Full hardness: 36 hours

At 60°C:

• Dust-free: 5 minutes
• Handling hardness: 30 minutes at 60°C, followed by 2 hours at 20°C
• Full hardness: 30 minutes at 60°C, followed by 24 hours at 20°C

9. When using short-wave infrared drying:

• Maximum temperature: 90°C
• Drying time: 10 minutes

PHYSICAL PROPERTIES

Application temperature: +15°C to +25°C

STORAGE

Protect the product from excessively low and high temperatures.

Avoid direct exposure to sunlight and store in a dry place.