BOLL
BOLL Brake Caliper Paint - Spray
High-temperature paint, based on premium-quality resins, specifically designed for brake calipers and drums. Durable, high-gloss coating, resistant to brake dust, salt, and chemicals also anti-corrosive protection, ensuring long-lasting performance.
Available options
9 variantsBuy by the carton (trade)
12 units / carton£71.17 inc. VAT (£59.31 ex. VAT) per carton of 12 · 10% trade discount, minimum 2 cartons.
Technical specifications
- Application temp.
- 18°C to 25°C
- Packaging
- spray
Safety & documentation
Hazards
Flammable
Harmful or irritant
Serious health hazardThis sheet covers the option selected above. Always verify product specifications and safety information before use.
More about this product
Paint with high-temperature properties for painting brake calipers and drums.
Made on the basis of the highest quality resins.
Creates a durable coating with a very high gloss, resistant to brake dust, salt and chemicals.
Offers anti-corrosive protection, ensuring long-lasting performance.
Temperature resistance up to 230°C.
Available Colours
- Red
- Yellow
- Blue
- Silver
- Black
- Green
- Gold
- Orange
- Navy blue
Application
1. Thoroughly sand the surface using P240–P360 abrasive paper and remove any loose rust particles.
2. Thoroughly clean and degrease the surface using BOLL Silicon Remover.
3. Mix the product thoroughly for approximately 3 minutes.
4. Apply 2–3 layers from a distance of 15–20 cm.
5. Allow 5–10 minutes between individual layers.
6. Allow approximately 12 hours for drying at 20°C.
7. After use, turn the container upside down and spray until the valve is empty.
Physical Properties
- Physical state: Aerosol
- Application temperature: +18°C to +25°C
